How to Handle Electronics After Water Damage
2/16/2021 (Permalink)
Taking The Following Steps Can Help Salvage Them
Whether it is the result of a storm in Diamond Bar, CA, faulty plumbing or broken appliances, water damage in your commercial building can come with a few additional problems. One of these is flooded electronics. These items likely play an important role in your business and can be pricey to replace. Taking the following steps can help salvage them.
1. Turn Off and Unplug Your Electronics
The first thing that you should do when dealing with flooded electronics is to make sure they are off and unplugged. Water and electricity are a dangerous combination, so before attempting this, turn off the power to your building. Be careful of any items that are powered with batteries as these may pose additional risks.
2. Drain and Dry Affected Devices
The longer the water is present in these devices, the more likely there will be damage like rust and corrosion. Remove any electronics from the area and drain as much water from them as you can. You may need to take some items apart, if you are able, to ensure the water has been completely removed. Do not attempt to turn on any items until they are thoroughly dry. This can be unsafe and can also result in permanent electronic damage.
3. Have Items Cleaned and Repaired by a Professional
When in doubt, have these tasks performed by a professional. A cleanup and restoration service will often make repairs to damaged belongings as well as your building. These professionals have the training and experience necessary to ensure your electronics are working properly and are safe to use again.
Because water can cause a lot of damage to your devices, it is important to have any flooded electronics taken care of as soon as possible. Drying them quickly can reduce the likelihood of permanent damage. A professional service is your best bet if you want to salvage water-damaged items.